POLYSPRING II heating constant level drinker

The heating system provides calories to both the bowl and the water inlet.
The 180 W model is recommended for Nordic countries.
Caution : It is recommended to order the thermostat and the right transformer suited to your facility and the number of heated drinkers.

POLYSPRING drinkers are designed to be used in numerous configurations.
Fitted with a constant level mechanism, they are designed with a wide double-walled, rotomolded polyethylene bowl.
Their mechanism is protected by a high-quality cast aluminium housing. The mechanism is 15 liters/minute depending on the pressure. The constant level model works ideally with pressure of 3 to 4 bars maximum.
They are fitted with:
• 1 LA GEE 15 litres/minute green float valve tap with adjustment screw,
• 1 water stop system,
• A cast aluminium mounting plate that can be directly fastened above the column,
• An anti-spill cast aluminium rim for optimal use without spillage, thus keeping bedding material clean.

In case of use on a network with higher pressure, it is mandatory to use a pressure limiter and filters.
Mounting recommendations: should preferably be installed on a rotomolded THERMO M, S or S PLUS column depending on the required installation or type of livestock.
Water supply can be connected directly to the THERMO M, S and S PLUS columns since it is delivered with a 1/2 flexible stainless steel braided hose.

The heating Polyspring features:
- 1 24 V (80 or 180 W) polyresistance
- 1 integrated thermostat adjustable from 4 to 40°C for the 180 W model.
- 1 LED indicator to show that the power is on.
Don't forget to order the thermostat and transformer suited to your facility.